ITALIAN MOLD GROUP
GROUP CAPABILITY SHEET
================================================================
A summary to assess the five Italian specialisms: processes, relevant companies, attributed capabilities, declared figures and a checklist to prepare the enquiry.

## Coordination model
- A shared point of contact coordinates the technical and commercial assessment with the right company.
- Technical, contractual and invoicing responsibility is agreed with the selected company; the group does not imply a single contracting entity.
- In this demo, prepare and download your enquiry. To start the assessment, share it through an official contact.

## Processes and the relevant company
High-pressure die casting — Aluminium and light alloys
High-pressure die-casting tooling with squeeze pins, vacuum and jet-cooling capabilities for filling and solidification control.
Feasibility analysis
Component feasibility analysis, metallization and deformation risks, and foundry-process optimization.
Technical documentation: http://www.tomos.it/research-technology-and-quality/
CAD/CAM design
2D/3D CAD/CAM/CAE design for cold-chamber aluminium and brass and hot-chamber zamak, with integrated 3D CAD/CAM.
Technical documentation: https://www.mecomitalia.it/ufficio-tecnico-costruzione-stampi-lavorazioni-meccaniche/
Technical documentation: http://www.tomos.it/mould-4-0/
Casting simulation
Casting simulation, including work with qualified collaborators. Study scope is agreed for the project.
Technical documentation: https://www.mecomitalia.it/servizi/
Technical documentation: https://www.modelleriamodini.it/ufficio-tecnico/
Technical documentation: https://www.modelleriamodini.it/produzione-gli-stampi/
Mould machining
Milling, drilling and boring for mould manufacture. Heat treatment through specialist suppliers, according to requirements.
Technical documentation: http://www.tomos.it/research-technology-and-quality/
Technical documentation: https://www.mecomitalia.it/ufficio-tecnico-costruzione-stampi-lavorazioni-meccaniche/
Inspection and sampling
CMM dimensional reports, on-machine measurement and preventive sampling. Trial scope and deliverables are agreed per project.
Technical documentation: https://www.mecomitalia.it/servizi/
Technical documentation: http://www.tomos.it/mould-4-0/
Low-pressure die casting — Casting design and sampling
Low-pressure casting moulds with foundry engineering, casting studies and sampling support within the project scope.
From drawing to CAD/CAM design
Tooling development from 2D drawings, 3D models or physical samples within the network’s low-pressure mould offering.
Technical documentation: https://www.modelleriamodini.it/ufficio-tecnico/
Technical documentation: https://www.modelleriamodini.it/produzione-gli-stampi/
Casting study
Casting studies and simulation. Application to a low-pressure mould and study scope are defined per project.
Technical documentation: https://www.modelleriamodini.it/ufficio-tecnico/
Technical documentation: https://www.modelleriamodini.it/produzione-gli-stampi/
Mould manufacture
Manufacture with CNC milling, turning and EDM capabilities selected for mould geometry and requirements.
Technical documentation: https://www.modelleriamodini.it/servizi/
Technical documentation: https://www.modelleriamodini.it/produzione-il-parco-macchine/
Technical documentation: https://www.modelleriamodini.it/produzione-gli-stampi/
Foundry sampling support
Foundry sampling and subsequent support. Low-pressure support is agreed within the supply scope.
Technical documentation: https://www.modelleriamodini.it/ufficio-tecnico/
Technical documentation: https://www.modelleriamodini.it/servizi/
Technical documentation: https://www.modelleriamodini.it/produzione-gli-stampi/
Gravity casting — Aluminium and brass
Gravity tooling, chill moulds and core boxes for brass and aluminium, with hot, cold and Cordis solutions.
Technical analysis and co-design
Technical feasibility analysis and co-design of the component, permanent mould or core box.
Technical documentation: https://www.ellebistampi.it/progettazione.html
Technical documentation: https://www.ellebistampi.it/produzione.html
Tooling CAD/CAM design
Tooling CAD/CAM design and 2D/3D design of aluminium gravity-casting moulds.
Technical documentation: https://www.ellebistampi.it/progettazione.html
Technical documentation: https://www.modelleriamodini.it/ufficio-tecnico/
Technical documentation: https://www.mecomitalia.it/ufficio-tecnico-costruzione-stampi-lavorazioni-meccaniche/
Casting simulation
Casting simulation for gravity permanent moulds alongside tooling design and sampling preparation.
Technical documentation: https://www.modelleriamodini.it/servizi/
Manufacture and assembly
Manufacture of permanent moulds and core boxes for brass and aluminium, including mould assembly and testing.
Technical documentation: https://www.ellebistampi.it/produzione.html
Dimensional inspection
Quality control and CMM dimensional reports. Dimensions, tolerances and documentation are agreed for the supply.
Technical documentation: https://www.ellebistampi.it/produzione.html
Technical documentation: https://www.ellebistampi.it/company-profile.pdf
Technical documentation: https://www.mecomitalia.it/servizi/
Sampling and foundry support
Foundry sampling and subsequent support, with prototyping available when the project requires it.
Technical documentation: https://www.modelleriamodini.it/servizi/
Plastic injection moulding — Thermoplastics · 2K · 3K
Thermoplastic injection moulds with gas assistance, Class A surface and 2K/3K capabilities.
Co-design and analysis
Product and moulding-requirement analysis, with co-design and 3D development within the requested scope.
Technical documentation: https://www.ofbm-stampi.com/tecnologie/
Technical documentation: https://www.mecomitalia.it/servizi/
Mould engineering
CAD/CAM/CAE engineering and design, with documented Moldflow analysis capability. Application is defined for the material and project.
Technical documentation: https://www.ofbm-stampi.com/tecnologie/
Technical documentation: https://www.mecomitalia.it/ufficio-tecnico-costruzione-stampi-lavorazioni-meccaniche/
Manufacture and assembly
Mould manufacture and assembly, with additional milling services for plastics tooling.
Technical documentation: https://www.ofbm-stampi.com/tecnologie/
Technical documentation: https://www.mecomitalia.it/ufficio-tecnico-costruzione-stampi-lavorazioni-meccaniche/
Technical documentation: https://www.ellebistampi.it/produzione.html
Dimensional inspection
Dimensional inspection and CMM reports. Documented PPAP and Cp/Cpk capability; the documentation package is agreed per supply.
Technical documentation: https://www.ofbm-stampi.com/tecnologie/
Technical documentation: https://www.mecomitalia.it/servizi/
Trials, sampling and maintenance
Trials, sampling, pre-series and mould repair. Maintenance is planned around project needs.
Technical documentation: https://www.ofbm-stampi.com/tecnologie/
Technical documentation: https://www.mecomitalia.it/servizi/
Technical documentation: https://www.mecomitalia.it/ufficio-tecnico-costruzione-stampi-lavorazioni-meccaniche/
Compression — SMC · BMC · GMT · LFT
Compression and injection-compression moulds for BMC, SMC, GMT and LFT, plus cutting tooling for composites.
Analysis and design
Development of compression moulds for SMC, LFT and GMT, plus BMC injection-compression tooling, with tooling analysis and design.
Technical documentation: https://www.ofbm-stampi.com/tecnologie/
Manufacture and assembly
Manufacture and assembly using documented multi-axis milling and EDM capabilities according to mould design.
Technical documentation: https://www.ofbm-stampi.com/tecnologie/
Dimensional verification
Mould dimensional inspection and checking fixtures. Reports and acceptance criteria are agreed for each project.
Technical documentation: https://www.ofbm-stampi.com/tecnologie/
Compression trials
Compression trials with documented capability up to 1,000 t, according to the supplied technical presentation. Trials are defined per mould.
Technical documentation: Supplied technical documentation
Sampling and maintenance
Sampling, pre-series, trials and mould maintenance: capabilities selected according to project scope.
Technical documentation: https://www.ofbm-stampi.com/tecnologie/

## Management standards documented across the network
ISO 9001
ISO 14001 / ISO 45001
Validity, site and applicable scope are confirmed for each supply.
Sources include published certificates and marks with different periods and levels of detail. Available documentation does not establish a joint network certification.
Technical documentation: https://www.ofbm-stampi.com/wp-content/uploads/2025/02/50-100-12761-Rev.004.pdf
Technical documentation: https://www.mecomitalia.it/
Technical documentation: https://www.modelleriamodini.it/azienda-qualita/

## Declared figures and their scope
81+ production machines and equipment
41+ machining and milling centres — included in the 81+
Documented minimums across the network. Availability and scope are defined for each project.
41 Machining and milling centres
10 Lathes
7 EDM systems
3 Grinding machines
4 Deep, micro and radial drilling
3 Mould spotting presses
2 Laser equipment
11 Other documented machine tools
Metrology, outside the production count: 2 CMMs and 1 measuring arm.
At least 80 declared moulds / year — https://www.mecomitalia.it/chi-siamo/
> 150 t of steel milled / year — https://www.mecomitalia.it/chi-siamo/
Up to 60 t · maximum mould weight — Supplied technical documentation
Up to 1000 t · compression trials — Supplied technical documentation

Documented areas
5 000 m² — surface without qualification — https://www.ofbm-stampi.com/
2 000 m² — declared facility surface — Supplied technical documentation
1 200 m² — production surface — https://www.ellebistampi.it/profilo.html
Declared areas retain their original scope. Storage and transport depend on the mould and destination; request an assessment from the shared coordinator.
550 kW of documented installed solar power
Partial documentary coverage of the network. Installed power; not annual electricity generation.
PARPAS Formula · 5 axes · work area 6000×2500×1600 (units not printed in the source) — https://www.ofbm-stampi.com/tecnologie/
IMSA MF1450 EVO · up to 9 axes · maximum deep-hole drilling 1500 mm — https://www.ofbm-stampi.com/tecnologie/
OPS Ingersoll · 50-electrode changer (a machine capacity, not a machine count) — https://www.ofbm-stampi.com/tecnologie/
FPT Tessen35 EVO · travels X 5000 · Y 1200 · Z 1500 mm (machine travel, not maximum mould dimensions) — https://www.modelleriamodini.it/produzione-il-parco-macchine/

## Checklist to prepare the enquiry
[ ] Component and function of the part
[ ] Material or alloy
[ ] Intended process or to be defined
[ ] Indicative dimensions and weight
[ ] Application press or equipment
[ ] Volume or number of cavities
[ ] Finish and critical dimensions
[ ] Acceptance criteria and required documents
[ ] Target phase and date
[ ] Desired scope: engineering, build, trials, transport and spare parts

## Capabilities by company

OFBM Stampi
Injection and compression moulds for plastics and composites.
Processes: Thermoplastic injection moulding (single, 2K and 3K), compression and injection-compression for BMC.
Materials: Thermoplastics, SMC, BMC, GMT, LFT and carbon-fibre composites.
Capabilities and controls: Class A finish, gas assistance and cutting tooling for composites.
Useful question: Does your part need a Class A finish or a 2K/3K variant? Describe it to assess the mould.
Official site: https://www.ofbm-stampi.com/

Mecom
Moulds for light-alloy casting and plastic injection moulding.
Processes: Light-alloy high-pressure die casting, aluminium gravity casting and plastic injection moulding.
Materials: Aluminium, brass, zinc alloy and thermoplastics.
Capabilities and controls: CAD/CAM/CAE, casting simulation, CMM metrology (Hexagon) and mould maintenance.
Useful question: Do you need to define critical dimensions, sampling or mould maintenance? State it to agree the control plan.
Official site: https://www.mecomitalia.it/

TOMOS
Aluminium and zinc-alloy die-casting moulds.
Processes: High-pressure die casting (HPDC) of aluminium and zinc alloy.
Materials: Aluminium and zinc alloy.
Capabilities and controls: Squeeze pins, vacuum and jet cooling; preliminary feasibility and foundry process analysis.
Useful question: Which alloy, component and press define your project? Share them to assess the HPDC mould.
Official site: http://www.tomos.it/

Ellebi Stampi
Gravity permanent moulds and core boxes.
Processes: Gravity casting (chill moulds) and milling service for other moulds.
Materials: Brass and aluminium.
Capabilities and controls: CAD/CAM, technical analysis, testing and validation, 3D prototyping and assembly.
Useful question: Which internal geometry must the core boxes accommodate? Describe it to assess the tooling.
Official site: https://www.ellebistampi.it/

Modelleria Modini
Foundry patterns, core boxes and moulds for gravity, low-pressure and high-pressure casting.
Processes: Gravity, low-pressure and high-pressure casting; patterns and core boxes (hot, cold, Cordis).
Materials: Materials machined for patterns and tooling: quenched and tempered steels, special steels, copper, aluminium, brass, bronze, resins and cast iron.
Capabilities and controls: CAD/CAM, casting simulation, sampling support and foundry consultancy.
Useful question: Are you starting from a 2D drawing, a 3D model or a physical pattern? State it to plan the mould and sampling.
Official site: https://www.modelleriamodini.it/

Information document by Italian Mold Group. It does not constitute an offer for a specific project.